Commercial fit-out decisions
Salon strip-out: connect the station layout to the removal scope
- Interior scope
- Renovation planning
Moving a salon station can involve a mirror and cabinet, a connected basin, or both. Those are different removal questions. Start with the new station arrangement and identify which ordinary interiors leave after the responsible trades have dealt with their connections.
CoreCut assesses commercial strip-outs for the building fit-out. Plumbing, electrical work and specialist equipment have separate providers. No medical-spa or clinical-equipment service is implied by an ordinary salon enquiry.
Compare a station refresh with wet-area relocation
| Proposed change | Fit-out removal | Separate decision |
|---|---|---|
| Renew dry stations in place | Specified mirrors, attached cabinets and finishes | Ownership and the replacement installer's receiving surface |
| Move wash stations | Defined cabinets and surrounding layers | Trade-designed connections and any required building openings |
| Change the tenant layout | Obsolete partitions and selected room finishes | New use, service arrangement and retained building boundaries |
Scroll across the table to see all columns.
This is an illustrative comparison, not a layout recommendation. A basin symbol on the new plan does not specify a concrete opening or establish that an existing route can serve it.
Separate furniture from attached construction
The operator should identify chairs, loose storage and other assets with their destination. For mirrors and cabinetry, distinguish items accepted for removal from those intended for reuse. Do not assume a demolition package includes intact salvage or reinstallation.
Check the interfaces around each station. A mirror may conceal unfinished wall; a cabinet may cover a break in the flooring. Tell the next installer what will be exposed and assign any preparation or repair it requires.
Make wet-service changes explicit
The responsible trades determine service preparation and the new installation. If their design needs floor or wall access, identify that as a separate assessed concrete item. The commercial-washroom guide explains the same distinction between fixture movement and the openings it may require.
For example, an illustrative salon renewal might retain reception and the dry stations while moving two wash positions under a new design. The ordinary removal package names affected cabinets and finishes; the trade package defines connections and any opening requirements. The whole salon is not automatically a full gut.
Bring the retained surfaces into the enquiry
Use the flooring-handover guide where a new floor is planned. Identify retained partitions, doors and stations, and explain whether the property is vacant or whether the project team is still assessing a staged arrangement.
Request a CoreCut assessment with the current and proposed station plan, items staying and the contacts handling connected services. That keeps the enquiry centred on the actual interiors rather than an undefined salon clearance.